nuvoDent

PINS

Bi-V-Pin with plastic sleeve
Bi-V-Pin with metal sleeve
Smart-Pin

Bi-V-Pin with plastic sleeve

Description

Bi-V-Pin with plastic sleeve

Narrow model pin with two dowel pins, ideal for positioning in
limited space.

• V-shaped profile suitable for use with close standing dies such
as ower anteriors.
• Only one drilling needed for each die.
• Tapered shape glides easily into final position
• Open-ended sleeve prevents clogging and simplifies cleaning
• Reproducible positioning without vertical adjustment of bite.
• Small base thanks to reduced pin length (12.5mm)

Plastic sleeve

No more deformation of your intercate bridge copings through sudden, erratic loosing of pins thanks to Easy Glide function.

• Remove without tension with a smooth, even gliding friction
   that runs along a special guide bar.
• Short friction distance of 1mm (end position) allows the safe
   and simple removal of even the most complex bridge framework
   such as with diverging dies.
• A strain relief gap compensates any possible pin tolerance and
   provides a smooth and uniform friction with all pins.
• Precision of fit and secure retention even after repeated insertion
   and retraction because the guide bar yields to the metal pin,
   thus there is no abrasion.
• Retention marks in the plastic sleeve’s outer surface secure them
   firmly in the model base.
• A membrane in the sleeve’s lower exit area stops plaster from
   entering during base forming.
• Custom plastic sleeves are dimensionally stable against moisture
   and heat (Steam-cleaning).

Technical Details

Shaft length	12.5 mm
Head length	5.5 mm
Ф head	2.0 mm
Sleeve width max.	3.8 mm

Bi-V-Pin with metal sleeve

Narrow model pin with two dowel pins, ideal for positioning in limited space.

• V-shaped profile suitable for use with close standing dies such
as lower anteriors.
• Only one drilling needed for each die.
• Tapered shape glides easily into final position.
• Open-ended sleeve prevents clogging and simplifies cleaning.
• Reproducible positioning without vertical adjustment of bite.
• Small base thanks to reduced pin length (12.5 mm)

Metal sleeve

• Nickel-plated pin and sleeve - no oxidation.
• Precision fit with slight friction between pin and sleeve.

Description

Bi-V-Pin with metal sleeve

Precision guidance

A high-tech production technique makes the pin’s guidance
so precise, the metal pin and sleeve both originate from the same lot. Continual precision adjustment of the production machine means these parts are never mixed. The precise matching of both components is noticeable in the technician’s accurate results.

Die handling

The pin improves die handling considerably. The technician uses the pin to hold the die, which also prevents damage. Further advantages: Dipping your wax coping is made easier and more ergonomic with the extended grip and thus leads to better results.

Technical Details

Shaft length	12.5 mm
Head length	5.5 mm
Ф head	2.0 mm
Sleeve width max.	3.6 mm

Smart-Pin

Narrow, short model pin with optimum insertion into metal sleeve.

• Precise, conical fit of the pins into the sleeve.
• Produces flat bases.
• Reduced plaster processing ensures reduced expansion within
the model.
• Ideal for crowded spaces e.g. anterior area.
• Particularly narrow retention head (1.6 mm) for delicate dies.

Description

Smart-Pin 1,000 Pines
Sleeves for Smart-Pins, 1,000 pieces