VIBRATOR

Vibrax



Vibrax processes thin fluids as well as viscous materials optimally.
This vibrator has a completely new conceptional design and has
not only a high standard of vibration, but is also very easy to use.



Description / Type : Vibrax, 230 V / 120 V

Constantly adapting vibration performance


• Two-wave unit: fine vibrations with full-wave, stronger vibration
   with half-wave, the correct power for every viscosity.
• Four intensity levels >for fine adjustment: sufficient bandwidth
   for all materials which need pouring. Easily adjusted, always    reproducible.


Durable and maintenance-free


• The use of electromagnets gives the device a very high service
   life with maintenance-free use and constant vibration.


Quiet and stable


• Controlled working as it stands firmly and only transfers
   minimal vibrations to the bench top. Will not tip even
   under high pressure at edge.


Ergonomical


• The large, easily operated lever switches are easily operated
   from the front of the device and fast detection of modified settings.
   The operator can concentrate fully on the impression or its casting
   ring, the device is operated intuitively.
• The Vibrax is very easy to clean, both the rubber mat and the switch    can be quickly removed and replaced for cleaning. Round,
   smooth surfaces leave no space for dirty corners and edges.
• The rubber mat with two different degrees of hardness offers high
   power on the mat and prevents the tray from jumping from the softer    rubber edge.
• Swivelling vibrating ball (optional) for precise positioning of impression    trays and casting rings, for all situations where special care is required.

                 Technical Details


Voltage 230 V, 50 Hz  
Frequency at 230 V 100 Hz  
Power consumption 150 VA (230V)  
Unit fuset 2 x 1,6 A (T)  
Dimension (W x H x D) 275 x 138 x 205 mm
( 10.83 x 5.43 x 8.07 inch)
 
Weight 6,5 kg  
Cable lenght 5 x 20 / T4A (2 x)